2026 Toyota RAV4 Phone Mount – 12.9-Inch Touchscreen
Vehicle-Specific Dash Mount for 2026+ Toyota RAV4 Models with the 12.9-Inch Touchscreen
The A-Tach #50778 is a vehicle-specific phone mount designed specifically for the 2026 and newer Toyota RAV4 with the larger 12.9-inch Toyota Audio Multimedia touchscreen.
This custom-fit RAV4 dash mount attaches to the left side of the factory display, providing a convenient and secure mounting location for your phone without drilling holes into the dashboard.
Important Fitment Notice: This mount fits only 2026+ Toyota RAV4 models equipped with the 12.9-inch touchscreen. If your RAV4 has the smaller 10.5-inch touchscreen, this is not the correct mount.
Part Number: 50778
Phone holder sold separately.
2026 Toyota RAV4 Phone Mount Fitment
Fits:
2026+ Toyota RAV4
Future RAV4 model years using the same applicable dashboard configuration
Models equipped with the 12.9-inch Toyota Audio Multimedia touchscreen
Mounting position: left side of the factory display
Does NOT fit:
Because Toyota redesigned the RAV4 interior for 2026, the dashboard and touchscreen configuration are different from the 2019–2025 RAV4. Always compare your dashboard with the product photos and verify the touchscreen size before ordering.
Toyota identifies the 2026 RAV4 as having a standard 10.5-inch or available 12.9-inch multimedia touchscreen, along with a standard 12.3-inch digital gauge cluster.
Why Choose the A-Tach 2026 RAV4 Phone Mount?
The 2026 Toyota RAV4 has an all-new interior and dashboard design. A universal phone mount may not provide the location, fit or stability you want.
The A-Tach #50778 is designed specifically around the 2026+ RAV4 dashboard with the larger 12.9-inch touchscreen.
Vehicle-Specific Design
This is not a universal dash mount. The A-Tach #50778 was designed specifically for the 2026+ Toyota RAV4 dashboard configuration with the 12.9-inch touchscreen.
The mount attaches on the left side of the factory display to provide a dedicated location for your phone.
No Drilling Required
The A-Tach RAV4 mount is designed to install without drilling holes into the vehicle's dashboard.
No permanent modification to the dashboard is required for installation.
Secure Mounting Location
The vehicle mount provides a solid mounting base for your phone holder. Once installed, the phone holder attaches to the vehicle mount using the mounting interface provided by A-Tach.
This creates a more purpose-built solution than relying on a universal windshield suction cup or air-vent clip.
Designed Around the 12.9-Inch Display
The location of the mount is specifically designed for the 2026+ RAV4 with the larger 12.9-inch touchscreen.
The mount installs on the left side of the display.
Always review the installation photos to confirm that the mounting position works for your particular vehicle and phone.
How the A-Tach RAV4 Phone Mount Works
The A-Tach system uses two separate components:
1. Vehicle Mount
The #50778 vehicle mount is the part specifically designed for the 2026+ Toyota RAV4 with the 12.9-inch touchscreen.
2. Phone Holder
A phone holder attaches to the vehicle mount and holds your phone.
The phone holder is not included with the #50778 vehicle mount.
This two-piece design allows you to choose the phone holder that best fits your phone, case and preferred mounting style.
Choose the Right Phone Holder for Your RAV4
A-Tach offers several phone-holder options that can be paired with the RAV4 vehicle mount.
Depending on your phone and preferences, you can choose from options such as:
Magnetic phone holders
MagSafe-compatible phone holders
Wireless charging phone holders
Qi wireless charging holders
Qi2 wireless charging holders
Clamp-style phone holders
Holders designed for larger phones and cases
See our Phone Holder Options to find the holder that works best with your phone.
The vehicle mount and phone holder are separate components, so be sure to select both parts when building your complete RAV4 phone-mounting solution.
2026 Toyota RAV4 MagSafe Phone Mount Options
If you use an iPhone with MagSafe, you can pair the A-Tach RAV4 vehicle mount with a compatible magnetic or MagSafe-style phone holder.
This allows the phone holder to be selected separately from the vehicle mount, giving you the flexibility to choose the mounting and charging features you want.
For phones and cases that support magnetic mounting, see the available A-Tach magnetic and MagSafe-compatible holder options.
2026 Toyota RAV4 Wireless Charging Phone Mount Options
If wireless charging is important to you, A-Tach offers wireless charging phone-holder options that can be used with compatible A-Tach vehicle mounts.
Available options include wireless charging holders using Qi or Qi2 technology.
The wireless charging function is provided by the phone holder, not the vehicle mount itself.
Check the specifications of the individual phone holder to verify compatibility with your phone and case.
AMPS Mounting Pattern
The A-Tach #50778 vehicle mount includes four pre-drilled holes using an AMPS mounting pattern.
This allows the vehicle mount to work with compatible phone-holder and mounting accessories.
The AMPS pattern is located on the vehicle mount and provides the connection point for the phone holder.
Made in the USA
A-Tach vehicle-specific mounts are manufactured in the USA.
Our vehicle mounts are designed around specific vehicle dashboards rather than being generic one-size-fits-all products.
The goal is simple: provide a secure, clean and practical mounting solution designed specifically for the vehicle.
2026 Toyota RAV4 Phone Mount Installation
The A-Tach #50778 is designed for no-drill installation on the 2026+ Toyota RAV4 with the 12.9-inch touchscreen.
Installation instructions are provided with the mount.
Before installing, carefully compare your RAV4 dashboard with the product photographs and installation information.
Because vehicle equipment and dashboard configurations can vary, the customer should verify that the mounting location and resulting phone position are appropriate for their vehicle and device.
View the installation instructions and installation video before installing.
Important 2026 RAV4 Fitment Information
The 2026 Toyota RAV4 represents a new generation with a redesigned interior and new multimedia system. Toyota offers the RAV4 with a standard 10.5-inch multimedia touchscreen and an available 12.9-inch touchscreen.
A-Tach #50778 is designed only for the RAV4 with the larger 12.9-inch touchscreen.
If your 2026 RAV4 has the smaller touchscreen, do not order this mount.
If you are unsure which touchscreen your RAV4 has, compare the screen in your vehicle with the product photos or contact A-Tach before ordering.
Frequently Asked Questions
What years does the A-Tach #50778 Toyota RAV4 phone mount fit?
The #50778 mount is designed for the 2026 and newer Toyota RAV4, specifically models equipped with the larger 12.9-inch touchscreen.
Does this mount fit the 2026 RAV4 with the 10.5-inch screen?
No. A-Tach #50778 is designed for the larger 12.9-inch touchscreen configuration.
If your 2026 RAV4 has the 10.5-inch touchscreen, you will need a different RAV4 mounting solution.
Where does the 2026 RAV4 phone mount attach?
The #50778 mount attaches on the left side of the factory 12.9-inch display.
Does the 2026 RAV4 phone mount require drilling?
No. The A-Tach #50778 is designed for no-drill installation.
Does the mount damage the RAV4 dashboard?
The mount is designed specifically for the applicable RAV4 dashboard and installs without drilling. Always follow the supplied installation instructions.
Does the phone holder come with the mount?
No. The #50778 is the vehicle mount only.
A compatible phone holder must be purchased separately.
Can I use a MagSafe phone holder?
Yes. A-Tach offers compatible magnetic and MagSafe-style phone holders that can be paired with the vehicle mount.
Can I use a wireless charging phone holder?
Yes. Compatible A-Tach wireless charging phone holders can be paired with the vehicle mount. Check the specific holder's specifications for your phone and case.
Will this mount work with an iPhone?
The vehicle mount is not phone-specific. You choose the phone holder separately based on your phone and case.
A-Tach offers holders for a wide variety of phones, including iPhone and Samsung devices.
Will this mount work with a phone case?
That depends on the phone holder you choose. Some holders accommodate thicker cases while others are designed for specific mounting styles.
Check the specifications of the phone holder before ordering.
Is this the same mount used for the 2019–2025 RAV4?
No. The 2026 RAV4 has a redesigned interior and dashboard. The #50778 is specifically designed for the 2026+ RAV4 with the 12.9-inch touchscreen.
For a 2019–2025 RAV4, see the appropriate 2019–2025 RAV4 phone mount.
Before You Order
Please verify all of the following:
? Your vehicle is a 2026 or newer Toyota RAV4
? Your RAV4 has the larger 12.9-inch touchscreen
? The dashboard shown in the product photos matches your vehicle
? You understand that the phone holder is purchased separately
? You have selected a phone holder compatible with your phone and case
If you are unsure whether this mount fits your RAV4, contact A-Tach before ordering.
Build Your Complete 2026 Toyota RAV4 Phone Mount
The A-Tach #50778 provides the vehicle-specific mounting base. Choose the phone holder that best fits your phone and how you want to use it.
Vehicle Mount: A-Tach #50778
Vehicle: 2026+ Toyota RAV4
Dashboard: 12.9-inch touchscreen configuration
Mounting Location: Left side of display
Installation: No drilling required
Phone Holder: Sold separately
Mounting Pattern: AMPS
Made in the USA
Find the phone holder that works best for your device and complete your 2026 Toyota RAV4 phone-mounting system.
[ITEMPRICE]
GTM-KSP4LST