Add Wireless Charging to Your Vehicle-Specific Dash Mount
Combine convenient wireless charging with the secure location of an A-Tach vehicle-specific dash mount. This universal Qi phone holder keeps your compatible phone within easy reach while providing up to 15 watts of wireless charging.
The holder attaches to a separately purchased A-Tach dash mount designed for your vehicle’s year, make, model and dashboard. This two-part system allows you to choose the correct mounting location for your vehicle and the holder that best fits your phone and charging needs.
A vehicle-specific dash mount is not included with this holder.
Installation Instructions
Please review the Universal Phone Holder Installation Instructions before attaching the holder to your A-Tach vehicle-specific dash mount.
View Installation Instructions
Fast Qi Wireless Charging
Place your Qi-compatible phone in the holder to charge without repeatedly connecting a charging cable directly to the phone. The adjustable lower support helps align the center of the phone with the holder’s charging coil for a reliable connection.
Charging speed depends on the phone, its wireless-charging capabilities, case thickness, power source and coil alignment. Although the holder supports charging up to 15 watts, individual phones may charge at 15W, 10W, 7.5W or another rate determined by the device.
Adjustable Fit for Many Smartphones
This holder fits many smartphones with screen sizes from approximately 4 to 6.7 inches. The supported device dimensions are:
-
Minimum width: 60 mm (2.36 inches)
-
Maximum width: 100 mm (3.94 inches)
-
Maximum thickness: 15 mm (approximately 5/8 inch)
-
Maximum height: 170 mm (approximately 6 5/8 inches)
Measure the phone with its case installed before ordering. Very thick or rugged cases may prevent the phone from fitting properly or interfere with wireless charging. The holder supports through-case charging with compatible nonmetallic cases up to approximately 3 mm thick.
Metal plates, wallets, grips, kickstands and other accessories placed between the phone and charger may interfere with charging.
Secure and Easy to Operate
Press the release button to open the holder, place the phone against the charging surface and gently squeeze the padded side arms inward. Anti-slip silicone padding helps protect the phone and hold it securely.
The adjustable lower feet help support different phone sizes and correctly position the phone over the charging area. A 17 mm swivel ball provides 360-degree rotation, allowing the holder to be positioned at a convenient viewing angle.
Before ordering, check where the holder’s side arms will contact your phone. On some devices, the arms may align with the power or volume buttons.
Power Requirements
This charging holder must be connected to a power source rated at 15 watts or higher. Many factory-installed vehicle USB ports do not provide enough power for proper fast wireless charging.
A 20W PD/QC 3.0 USB-C and USB-A car adapter is included for vehicles equipped with a 12-volt accessory outlet. A USB-C to USB-C fast-charging cable is also included.
If your vehicle does not have a 12-volt outlet or a suitable high-output USB-C port, a compatible hardwire kit may be needed.
MagSafe Compatibility
The holder can be used with MagSafe-compatible phones and cases while the adjustable arms physically secure the phone. Two adhesive rings are included for compatible applications when additional alignment support is needed.
This is an adjustable cradle-style holder and should not be confused with a magnetic-only MagSafe holder.
Apple CarPlay and Android Auto
Wireless charging supplies power to the phone but does not create a data connection with the vehicle. If your vehicle requires a wired USB connection for Apple CarPlay or Android Auto, the phone must still be connected to the appropriate vehicle USB port.
Vehicles equipped with wireless CarPlay or wireless Android Auto can use those features without a separate data cable, subject to the vehicle and phone’s compatibility.
Ideal for Personal, Commercial and Fleet Vehicles
Because the holder adjusts to accommodate multiple phone sizes, it is a practical option for work trucks, delivery vans and fleet vehicles used by different drivers. Each driver can place a compatible Qi-enabled phone in the same holder without needing a model-specific charging cradle.
Holder Features
-
Up to 15W Qi wireless charging
-
Supports compatible 15W, 10W and 7.5W Qi-enabled phones
-
Fits many phones from approximately 4 to 6.7 inches
-
Adjustable padded side arms
-
Push-button release
-
Adjustable lower support for charging-coil alignment
-
Anti-slip silicone padding
-
One-handed operation
-
360-degree rotation
-
17 mm swivel ball
-
AMPS hole-pattern base
-
Temperature-control and smart power-off features
-
Useful for personal, commercial and fleet vehicles
What Is Included?
Your purchase includes:
-
Universal Qi wireless charging phone holder
-
17 mm swivel ball with tilt and 360-degree rotation
-
20W PD/QC 3.0 USB-C and USB-A 12-volt car adapter
-
USB-C to USB-C fast-charging cable
-
Two adhesive rings
-
Four small screws for attaching the holder to a compatible mount
An A-Tach vehicle-specific dash mount is purchased separately.
GTM-KSP4LST
