RAM 2500 & 3500 Phone, Tablet & Device Dash Mounts

What year is your RAM 2500-3500?

Vehicle-Specific Dash Mounts for RAM 2500 and 3500 Trucks

RAM 2500 and 3500 trucks are built for demanding work. They serve contractors, agricultural operations, towing companies, mobile service providers, utilities, delivery fleets and drivers who depend on their trucks every day.

Phones, tablets, GPS units and other compatible devices are often part of that work. Drivers may use them for navigation, dispatch, job scheduling, inspections, work orders, communication and route management. A vehicle-specific dash mount creates a defined location for this equipment without depending on a universal suction cup, adhesive pad or ordinary vent clip.

RAM has changed the dashboard, center display, vents, controls and trim throughout the 2500 and 3500 model history. The correct mounting solution therefore depends on the truck’s model year and actual dashboard configuration.

Select your RAM 2500 or RAM 3500 model-year range above to begin.

Shop RAM 2500 and 3500 Mounts by Model Year

2019–Current RAM 2500 and 3500 Dash Mounts

Browse vehicle-specific mounts for compatible 2019 and newer RAM Heavy Duty interiors. These trucks may be equipped with different center displays, controls, trim and console configurations.

The size and orientation of the center display can be especially important when selecting a mount. Compare each truck’s interior with the individual product photos and read all display-specific fitment requirements.

2013–2018 RAM 2500 and 3500 Dash Mounts

Shop dash mounts designed for compatible 2013–2018 RAM Heavy Duty dashboards. Available mounting solutions may vary according to the center display, radio, controls, trim and intended mounting location.

Fleet operators with several trucks should confirm whether all vehicles share the same center-dashboard configuration before ordering multiple mounts.

2010–2012 RAM 2500 and 3500 Dash Mounts

Find vehicle-specific mounting solutions developed around compatible 2010–2012 RAM 2500 and 3500 interiors. Compare the radio, vents, controls and surrounding trim with the product photos before selecting a mount.

2006–2009 Dodge RAM 2500 and 3500 Dash Mounts

Browse mounting solutions for compatible 2006–2009 Dodge RAM Heavy Duty truck dashboards. Review the individual product page for the exact model years, dashboard arrangement and installation location supported.

2003–2005 Dodge RAM 2500 and 3500 Dash Mounts

Shop dash mounts developed for compatible 2003–2005 Dodge RAM truck interiors. These mounts provide a vehicle-specific foundation for adding a separately purchased phone or device holder.

1998–2002 Dodge RAM 2500 and 3500 Dash Mounts

Find mounting solutions for compatible 1998–2002 Dodge RAM Heavy Duty dashboards. Compare the truck’s vents, radio, controls and trim with the product listing to confirm fitment.

Fleet Value Begins with the Correct Vehicle Mount

A fleet may contain trucks purchased in different years, from different dealers or with different equipment packages. Even if every vehicle is a RAM 2500 or 3500, the dashboards may not be identical.

A-Tach vehicle mounts are selected for a defined dashboard—not simply the RAM model name. This makes it possible to match each truck with the appropriate mounting platform while developing a more consistent device strategy throughout the fleet.

A planned fleet installation can help a business:

Establish repeatable device locations in compatible trucks
Match mounts to specific dashboard configurations
Select holders for company-issued devices
Accommodate phones in rugged protective cases
Replace holders when devices are upgraded
Reduce dependence on assorted universal mounts
Document known mount-and-holder combinations
Equip future replacement trucks more efficiently

Before ordering quantities, group the vehicles by model year, center display and dashboard configuration. Trucks that appear similar from the outside may require different mounts inside the cab.

A Two-Part System for the Truck and the Device

An A-Tach RAM mounting solution uses two separately purchased components:

A vehicle-specific RAM 2500 or 3500 dash mount
A phone, tablet or device holder

This two-part approach separates vehicle compatibility from device compatibility.

Part 1: Vehicle-Specific RAM Dash Mount

The vehicle mount attaches at a compatible dashboard location and creates the foundation for the system.

Select the mount according to:

RAM 2500 or RAM 3500 application
Model year
Center-display or radio configuration
Vent and control layout
Dashboard trim
Console or seating configuration, when applicable
Preferred device location
Intended phone, tablet or other compatible equipment

Always compare the actual truck with the individual mount photos before ordering.

Part 2: Phone, Tablet or Device Holder

The holder attaches to the A-Tach vehicle mount and secures the equipment.

Choose the holder according to:

Device width, height and thickness
Protective-case dimensions
Clamp-style or magnetic holding preference
MagSafe compatibility
Qi or Qi2 wireless charging needs
Phone, tablet or specialty-device use
Individual-driver or shared-vehicle operation

The truck determines which vehicle mount fits. The device, case and operational requirements determine which holder is appropriate.

Because the components are separate, a fleet may be able to keep its compatible vehicle mounts when devices are upgraded and replace only the holders.

Holder Options for Personal and Commercial Equipment

Depending on the RAM mount and holder selected, an A-Tach system can be configured with:

Adjustable clamp-style phone holders
Holders for larger phones and rugged cases
Magnetic phone holders
MagSafe-compatible holders
Qi wireless charging holders
Qi2 magnetic wireless charging holders
Tablet holders
GPS and other compatible device holders
Dual-device arrangements on select mounts

Phones and cases should be measured together when selecting a holder. A company-issued protective case can substantially change the device’s width and thickness.

Tablets and heavier work devices require additional consideration. Check the individual vehicle mount and holder listings for device-size, weight and mounting-location requirements.

Built Around Heavy-Duty Truck Applications

RAM 2500 and 3500 trucks support a wide range of commercial and vocational uses. A vehicle-specific mounting system may provide a suitable foundation for compatible equipment used in:

Construction and contracting
Agriculture and ranching
Towing and recovery
Mobile repair and field service
Utility and telecommunications work
Property and facility maintenance
Delivery and route operations
Snow removal
Commercial hauling
RV and trailer towing
Municipal fleet operations

Depending on the equipment selected, drivers may use mounted devices for navigation, dispatch, work orders, customer information, inspections, job documentation and hands-free communication.

Always position mounted equipment so it does not obstruct the driver’s view, cover necessary controls or interfere with safe vehicle operation.

Consistent Device Placement Across the Fleet

Consistency can be valuable when employees operate more than one truck. A predictable device location reduces the need for each driver to bring or position a different universal mount.

For trucks with matching interiors, a standardized A-Tach configuration can give drivers a familiar location for company equipment. Fleet managers can record the vehicle mount, holder and device combination assigned to each dashboard group.

A simple fleet mounting record might include:

Vehicle or asset number
RAM model
Model year
Center-display size and orientation
Dashboard configuration
Device model
Protective-case dimensions
Vehicle mount part number
Holder part number
Quantity required

This information can make it easier to equip additions to the fleet and order replacement components later.

Why Vehicle-Specific Beats One-Size-Fits-All

Universal mounts often depend on whatever attachment point is available in the cab. A suction cup may be placed differently in every truck. Adhesive mounts require a suitable surface. Ordinary vent clips place the device’s weight on adjustable vent louvers, while cup-holder mounts occupy useful cab storage.

These variations can make it difficult to create a uniform mounting standard.

An A-Tach mount is developed around a compatible RAM dashboard location. This gives the holder a defined foundation and allows the mount and holder to be selected independently.

No-Drill RAM 2500 and 3500 Dash Mounts

A-Tach vehicle-specific mounts are designed to install without drilling holes into the truck’s dashboard. Depending on the product, the mount may use compatible dashboard seams, panel edges or other existing interior features.

The installation method varies, so always read the supplied instructions and insert. Test-fit and install the vehicle mount by itself before attaching the separately purchased phone, tablet or device holder.

A-Tach dash mounts avoid relying on many common universal attachment methods, including:

Windshield suction cups
Permanent dashboard adhesive
Ordinary vent-louver clips
Weighted dashboard pads
Cup-holder mounting bases

The result is a dedicated mounting foundation designed around a compatible RAM Heavy Duty interior.

Planning a RAM Fleet Installation

Before placing a large order, inspect the vehicles and divide them into groups with matching interiors.

For each group:

Confirm the RAM model and model year.
Record the center-display or radio configuration.
Compare the dashboard with the product photos.
Identify the device and protective case.
Decide whether a clamp, magnetic or charging holder is needed.
Confirm whether the mount is appropriate for a phone, tablet or other device.
Record the selected mount-and-holder combination.

For a large deployment, purchasing one complete mounting system for evaluation in a representative truck can help confirm fitment, device position and holder choice before ordering for all matching vehicles.

Why Choose A-Tach for RAM Work Trucks?

A-Tach specializes in vehicle-specific mounting platforms rather than a single universal bracket intended for unrelated dashboards.

Benefits for RAM owners and fleet operators include:

Vehicle-specific RAM 2500 and 3500 designs
Applications covering multiple dashboard generations
Defined mounting locations in compatible trucks
No drilling into the dashboard
Separately selected and replaceable holders
Options for phones, tablets and other compatible devices
Clamp-style, magnetic and MagSafe holders
Qi and Qi2 wireless charging options
Dual-device capability on select mounts
Durable ABS plastic construction
Bulk purchasing options
Manufactured in the USA
Veteran-owned American company

How to Select the Correct RAM Mount

1. Confirm the Model and Model Year

Identify whether the vehicle is a RAM 2500 or 3500 and select the correct model-year category.

2. Inspect the Center Dashboard

Compare the display or radio, vents, controls, trim and console with the individual product photos.

3. Read the Complete Fitment Information

Check for display-size, trim, console or mounting-location requirements. Do not assume that every RAM truck within a model-year range uses the same mount.

4. Choose the Holder Separately

Select the phone, tablet or device holder according to the equipment’s complete dimensions, including its protective case.

5. Record the Configuration

For fleet use, document the mount and holder part numbers associated with each dashboard and device combination.

Frequently Asked Questions

Do the RAM 2500 and RAM 3500 use the same dash mount?

They may share compatible dashboards within certain model years, but fitment must be confirmed on the individual product page. Compare the display, vents, controls, trim and console with the product photos.

Will every mount fit every RAM truck in the listed year range?

No. RAM trucks may have different display sizes, radios, trim and console configurations within the same model-year range. Read the complete compatibility information before ordering.

Is the phone or device holder included?

No. The vehicle-specific dash mount and phone, tablet or device holder are selected and purchased separately.

Why is the two-part system helpful for fleets?

It allows vehicle fitment and device fitment to be managed separately. Each truck receives the mount designed for its dashboard, while holders can be selected around the fleet’s phones, cases or tablets.

Can we retain the mounts when our company changes phones?

In many cases, yes. If the vehicle mount remains compatible with the truck, the fleet may be able to replace only the holder when devices or cases change.

Can A-Tach assist with a bulk order?

A-Tach offers bulk purchasing options. Gather the truck quantities, model years, dashboard configurations, device information and holder requirements before contacting A-Tach Mounts.

Should we test one mounting system before a fleet installation?

For a large order, testing one complete mount-and-holder combination in a representative truck can help confirm fitment, device location and holder compatibility before wider deployment.

Does installation require drilling into the dashboard?

A-Tach vehicle-specific mounts are designed for no-drill installation. Attachment methods vary by product, so installers should read the supplied instructions and test-fit the mount before attaching the holder.

Will a holder accommodate a rugged phone case?

Choose the holder according to the phone’s complete dimensions while it is inside the case. Measure the equipment in its normal working configuration before ordering.

Can a RAM dash mount support a tablet?

Certain mounts can support tablets when paired with an appropriate tablet holder. Review the individual mount page for device-size, weight and mounting-location requirements.

Are MagSafe and wireless charging holders available?

Yes. Magnetic, MagSafe-compatible, Qi wireless charging and Qi2 magnetic wireless charging holders are available separately.

Can we mount two devices in one truck?

Certain RAM vehicle mounts may support two separately purchased holders or another dual-device configuration. Check the individual mount page for availability and limitations.

Does engine selection determine mount fitment?

Gas or diesel engine selection does not normally identify the required dash mount. Fitment is determined by the model year and dashboard configuration described on the individual product page.

What information should we provide for fleet fitment help?

Provide the RAM model, model year, number of trucks, center-display or radio configuration, console arrangement, intended device and protective-case dimensions. Clear dashboard photos can help confirm compatibility.

Equip Your RAM 2500 and 3500 Trucks

Select the correct model-year range, compare each truck’s dashboard with the available product photos and choose the vehicle-specific mount designed for that interior. Then add the separately purchased phone, tablet or device holder that meets your operational needs.

For fleets containing several model years or dashboard configurations, contact A-Tach Mounts before placing a large order. A vehicle inventory, device information and clear dashboard photos can help identify the correct mount-and-holder combinations.