Vehicle-Specific Below-Display Mount for the 2026+ Lexus IS
The driver-focused interior of the 2026 and newer Lexus IS combines a prominent center display with sculpted dashboard trim, closely positioned air vents and limited flat mounting surfaces. These distinctive contours make it difficult for a universal phone mount to provide a secure and well-positioned attachment point.
The A-Tach #50814 dash mount is designed specifically for this Lexus IS interior. It attaches below the center display, creating a centrally positioned mounting platform without attaching anything to the display screen, windshield or air-vent louvers.
A Convenient Central Mounting Position
The below-display location keeps the device near the center of the dashboard where it can be conveniently viewed by the driver or passenger. It is a good option for someone who prefers a centered device position rather than mounting a phone beside the left or right edge of the display.
This location also keeps the phone away from the windshield and leaves the cup holders available for their intended purpose.
Before ordering, review all installed product photos and consider:
Phone and protective-case size
Type and dimensions of the selected holder
Preferred viewing height and angle
Access to surrounding displays and controls
Driver or passenger use
The completed position of the device will depend on the size of your phone, case and separately purchased holder.
Why Vehicle-Specific Fit Matters in the Lexus IS
The Lexus IS dashboard was not designed around a universal phone-mounting system. The center display, vents, controls and sculpted trim leave few practical locations for attaching a generic mount.
A cup-holder mount occupies useful console space. An ordinary vent clip places the weight of the phone and holder on the vent louvers. A windshield suction cup can be bulky, while adhesive mounts depend on surfaces that may not provide the desired position.
The A-Tach mount is formed for the listed Lexus IS dashboard and installs in the specific location shown in the product photos.
A-Tach advantages include:
Designed specifically for the 2026 and newer Lexus IS
Attaches below the center display
Provides a central device-mounting location
No drilling into the vehicle
No dashboard-panel removal
No permanent dashboard adhesive
Keeps the cup holders available
Avoids attaching a holder to the air-vent louvers
Durable ABS plastic construction
Manufactured in the USA
Made by a veteran-owned American company
Build a Mounting Solution for Your Phone
This product is the vehicle-specific Lexus IS dash mount only. A phone or device holder must be purchased separately.
Offering the vehicle mount and holder separately allows you to choose the holder that best matches your phone, protective case and preferred features.
Compatible holder choices include:
Adjustable clamp-style phone holders
Holders for larger phones and protective cases
Magnetic phone holders
MagSafe-compatible holders
Qi wireless-charging holders
Qi2 magnetic wireless-charging holders
The mount includes four small predrilled holes in the standard AMPS pattern. This common attachment arrangement allows it to work with many compatible phone and device holders.
The Lexus IS determines the vehicle mount. Your phone, case and preferred features determine the holder.
Confirm Your Lexus IS Fitment Before Ordering
This mount fits the 2026–current Lexus IS and is designed for the dashboard and center-display arrangement shown in the product photos.
The Lexus IS has used different dashboard designs across its model years. A mount made for an earlier Lexus IS should not be assumed to fit the 2026 and newer interior.
Before ordering:
Confirm that your vehicle is a 2026 or newer Lexus IS.
Compare your center display, dashboard trim, vents and controls with every product photo.
Confirm that the below-display location suits your preferred device position.
Consider the combined size of your phone, case and selected holder.
Read the complete product information and installation instructions.
Interior equipment can vary by model, trim level and sales market. If your dashboard does not match the photos, contact A-Tach before ordering.
No-Drill Installation
The A-Tach #50814 mount is designed to attach without drilling holes into the Lexus dashboard or removing dashboard panels. Installation instructions are included, and no special tools are required for attaching the vehicle mount.
Install and test the vehicle mount by itself before fastening the phone or device holder to it. This allows you to confirm the fit and mounting location before completing the two-part system.
Important: Once a holder has been screwed into the mount or the mount’s predrilled holes have been enlarged, the mount is considered used and cannot be returned for a refund. Read the instructions and included product insert before installation.
Designed Around the Lexus IS Interior
A vehicle-specific mount provides a dedicated attachment platform in a defined location instead of relying on a universal attachment method.
The below-display position helps preserve the purposeful layout of the Lexus IS interior by avoiding the windshield, cup holders and air-vent louvers. Its central location can also provide a balanced appearance that complements the dashboard.
Always position the phone and holder so they do not obstruct the driver’s view, cover important displays or controls, or interfere with safe vehicle operation.
Frequently Asked Questions
Which Lexus IS model years does this mount fit?
This mount is designed for the 2026 and newer Lexus IS dashboard shown in the product photos. It should not be assumed to fit earlier Lexus IS interiors.
Where does the mount attach?
It attaches below the center display, creating a central device-mounting position.
Does it attach to the display screen?
No. The mount attaches to the compatible dashboard area below the display as shown in the product photos. It does not attach directly to the screen.
Does a phone holder come with the mount?
No. This product includes the vehicle-specific dash mount only. A compatible phone or device holder must be purchased separately.
Why are the mount and holder sold separately?
The vehicle determines which dash mount fits, while the dimensions of your phone and case help determine which holder is appropriate. Selling the two components separately lets you choose the holding and charging features you prefer.
Does installation require drilling into the Lexus?
No. The vehicle mount installs without drilling holes into the dashboard or removing dashboard panels. The small predrilled holes in the mount itself are used to attach the separately purchased holder.
Can I use a MagSafe holder?
Yes. The mount can be paired with a compatible magnetic or MagSafe-style holder. Verify that the selected holder works with your phone and protective case.
Can I add wireless charging?
Yes. Compatible Qi and Qi2 wireless-charging holders are available separately. Check your phone and case for charging compatibility before selecting a holder.
Will the phone cover any controls?
The completed device position depends on the dimensions of the phone, case and selected holder. Review all installed product photos and compare the available space with your equipment before ordering. Position the holder so the device does not cover important controls or interfere with safe operation.
How does this differ from the display-side Lexus IS mount?
This mount positions the device centrally below the display. A separate A-Tach Lexus IS mount is available for drivers who prefer a phone on the left or right side of the center display.
Is the mount made in the USA?
Yes. A-Tach vehicle-specific mounts are manufactured in the USA by a veteran-owned company.