International HX Phone & Device Dash Mounts

Find the Right Dash Mount for Your International HX

International changed the HX dashboard beginning with the 2022 model year. Selecting the correct A-Tach dash mount therefore begins with identifying whether your truck has the 2017–2021 or 2022–Current dashboard.

A-Tach designs vehicle-specific mounting platforms around compatible International HX interiors. Instead of depending on a universal windshield suction cup, permanent adhesive pad, ordinary vent-louver clip or cup-holder mount, you receive a dedicated mounting location made for the dashboard shown in the product photos.

Start by selecting your International HX model-year range.

Choose Your International HX Model Year

2022–Current International HX Dash Mounts

View dash mounts for 2022–Current International HX trucks

The 2022 International HX introduced a significantly different dashboard from the earlier HX interior. Available mounts are designed for select dashboard configurations used in these newer trucks.

More than one center-dash style may be available. Compare the panel shape, trim, controls, vents and surrounding dashboard carefully with the individual product photos before ordering.

2017–2021 International HX Dash Mount

View the dash mount for 2017–2021 International HX trucks

The earlier International HX uses the center-gauge dashboard configuration shown on the A-Tach 50125 product page. The mounting base extends across the center gauge area, providing flexibility when positioning a separately purchased phone or device holder.

Review the complete compatibility information on the product page because the mount must match the dashboard shown—not simply fall within the general model-year category.

Why the HX Model Year and Dashboard Matter

The International HX underwent a major interior redesign, creating two distinctly different dashboard generations. A mount designed around the earlier center-gauge panel will not automatically fit the redesigned 2022–Current interior.

Dashboard differences may include:

• Center-panel shape and angle

• Gauge configuration

• Vent design and placement

• Switch and control locations

• Dashboard trim packages

• Radio and equipment configurations

• Fleet- or vocational-equipment installations

• Available mounting locations

After selecting the model-year range, compare the complete dashboard with every product photo and read the individual mount’s compatibility information.

Built for Commercial and Vocational Trucks

International HX trucks are commonly used for heavy hauling, construction, utility work, municipal service and other demanding vocational applications. Drivers may depend on phones and compatible work devices for:

• Navigation and route planning

• Dispatch communication

• Work orders and service information

• Delivery or load documentation

• Fleet-management applications

• Hands-free communication

• GPS and compatible work technology

An A-Tach dash mount creates a consistent device location designed around the compatible truck interior. This can be particularly useful for fleet operators who want drivers to have a familiar mounting position across similarly equipped HX trucks.

The A-Tach Two-Part Mounting System

An A-Tach mounting solution consists of two components that are purchased separately.

Part 1: Vehicle-Specific Dash Mount

The vehicle mount attaches to the compatible International HX dashboard and provides the foundation for the mounting system.

Choose the dash mount according to:

• International HX model year

• Actual dashboard configuration

• Available mounting location

• Intended phone or device

• Product-specific weight and size limitations

Part 2: Phone or Device Holder

The separately purchased holder attaches to the vehicle-specific dash mount and secures the phone or other compatible equipment.

Choose the holder according to:

• Phone or device dimensions

• Protective-case size and thickness

• Clamp or magnetic holding preference

• MagSafe compatibility

• Qi or Qi2 wireless-charging requirements

• Phone, GPS, ELD or tablet use when applicable

The truck and dashboard determine the mount. The device, case and preferred features determine the holder.

Find Your Phone or Device Holder

Phone, Charging and Commercial Device Options

Depending on the HX mount and holder selected, an A-Tach mounting solution may be configured for:

• Adjustable clamp-style phone holders

• Large phones with protective cases

• Magnetic phone holders

• MagSafe-compatible holders

• Qi wireless-charging holders

• Qi2 magnetic wireless-charging holders

• GPS units

• Compatible ELDs or tablets where specifically permitted

• Other lightweight work devices

Review the individual mount page before installing a larger or heavier device. Keep extension arms as short as practical, and make sure the completed installation will not cover essential gauges, block the driver’s view or interfere with vehicle controls.

No-Drill International HX Dash Mounts

A-Tach vehicle-specific mounts are designed to install without drilling holes into the International HX dashboard. The exact attachment method varies by mount and dashboard style.

Always read the supplied instructions and insert, and test-fit the vehicle mount by itself before attaching a phone or device holder. This helps confirm the dashboard match before completing the two-part mounting system.

Why Choose an A-Tach International HX Mount?

• Designed for specific International HX dashboards

• Separate options for different HX generations

• Dedicated commercial-truck mounting locations

• No drilling into the dashboard

• No permanent dashboard adhesive

• No windshield suction cup

• No ordinary vent-louver clip

• Interchangeable phone and device holders

• Magnetic and wireless-charging options

• Durable ABS plastic construction

• Manufactured in the USA

• Made by a veteran-owned American company

How to Select the Correct HX Mount

1. Confirm the Model Year

Determine whether the International HX falls within the 2017–2021 or 2022–Current model-year range.

2. Compare the Complete Dashboard

Compare the truck’s center panel, gauges, vents, controls, switches and surrounding trim with every product photo.

3. Read the Compatibility Details

Review all model-year, dashboard-style, device-size and mounting-location requirements on the individual product page.

4. Choose the Device Holder

After selecting the correct HX dash mount, choose a separately purchased holder that accommodates the phone, protective case or other compatible device.

Frequently Asked Questions

Will one dash mount fit every International HX?

No. The International HX has used distinctly different dashboard generations. Begin with the model year and then confirm that the dashboard matches the individual product photos.

What changed for the 2022 International HX?

The 2022 HX received a substantially redesigned interior and dashboard. This means the earlier HX center-gauge mount should not be assumed to fit a 2022 or newer truck.

Is model year enough to identify the correct mount?

Not always. Trucks within a model-year range can have different dashboard panels, equipment packages or vocational installations. Always compare the actual dashboard with the product photos.

Is the phone or device holder included?

No. The vehicle-specific HX dash mount and phone or device holder are purchased separately. This allows the holder to be chosen according to the device dimensions, protective case and desired features.

Do A-Tach HX mounts require drilling?

A-Tach vehicle-specific dash mounts are designed for no-drill installation on compatible dashboards. Follow the instructions supplied with the selected mount.

Can I use a MagSafe or wireless-charging holder?

Yes. After choosing the correct HX dash mount, select an appropriate MagSafe-compatible, Qi or Qi2 holder for the phone and case.

Can an International HX mount hold an ELD or tablet?

Certain mounting locations may accommodate an ELD or tablet when paired with an appropriate holder. Check the individual dash mount page for device-size and weight limitations before ordering.

What should I do if my dashboard does not match the photos?

Do not order based only on the truck’s model and year. Contact A-Tach Mounts and include the model year and clear photographs of the complete center dashboard.

Find the Dash Mount Made for Your International HX

Select the correct International HX model-year range, compare the dashboard with the available product photos and choose the vehicle-specific mount designed for that interior. Then select the separately purchased holder that fits your phone, case or compatible work device.