You Found It!
Now get one for yourself.
You deserve the best.
Do you need to move your phone a little to avoid interfering with other vehicle functions?
This extension plate will give you the ability to move your phone up to 2.75 inches (70mm). Up, down, right or left … any direction will work with this extension plate. Comes with four screws to attach the extension plate onto a vehicle mount that uses a 4-hole AMPS pattern like our A-Tach vehicle mounts use.
NOTICE: Pre-drilled marker holes are placed at 2.75 inches (70mm). A phone holder, however, can be attached anywhere on the extension plate that will work to better position your phone. Simply screw the steel screws into the extension plate in any location without using the pre-drilled holes. It is really quite easy to do.
Here is some extra detail ... The 13001 extension plate has 4 small holes in one end and 8 larger holes in the other end of the plate. The 4 smaller holes are there to align with the device holder base and the device holder base should be able to be attached onto those 4 small holes. Most device holders come with their own screws to use to attach the holder to the mount or in this case attach onto the extension plate.
The 8 larger holes in the other end of the extension plate are for attaching the extension plate onto the vehicle mount. The 8 holes are arranged in a way that the pattern will work regardless of if the extension plate is placed horizontal or vertical on a vehicle mount. The 4 small screws that come with the extension plate can be used to secure the extension plate to the vehicle mount.
Actual plate size: 2 1/8 X 4 1/8 (3/16 in. Thick) Or 55 X 115 (4.5 mm Thick)
Select a row below to filter reviews.
5.0
[ITEMPRICE]