Silverado & Sierra 1500, 2500HD and 3500HD Dash Mounts

Find a vehicle-specific dash or console mount for your compatible Chevrolet Silverado 1500, 2500HD or 3500HD—or GMC Sierra 1500, 2500HD or 3500HD. This category covers the 2019–2022 truck interior and select 2022–2024 Limited or LTD continuation models that retained the compatible dashboard design.

A-Tach Mounts offers several mounting locations for phones, tablets, GPS units and other compatible devices. The correct mount depends on the truck’s model, series, year, trim, factory display, shifter and center-console configuration.

Important: The applicable model-year range is different for 1500 and HD trucks. This category does not cover every Silverado or Sierra manufactured from 2019 through 2024. Review the ranges below and compare your actual interior with the individual product photos before ordering.

Silverado and Sierra Model-Year Fitment

Chevrolet Silverado

• Silverado 1500: 2019–2022

• Silverado 2500HD and 3500HD: 2020–2022

• Silverado 1500, 2500HD and 3500HD Limited/LTD: 2022–2024

GMC Sierra

• Sierra 1500: 2019–2022

• Sierra 2500HD and 3500HD: 2020–2022

• Sierra 1500, 2500HD and 3500HD Limited/LTD: 2022–2024

For 2023 and 2024 trucks, this category applies only to compatible Limited or LTD continuation-style interiors. Newer redesigned interiors require different A-Tach mounts.

Important Limited, LTD and Trim Information

General Motors used overlapping generations and continuation-model names during this period. A truck’s model-year label alone may not identify its dashboard.

In particular:

• Certain 2019 and 2020 Limited or LD trucks use the previous-generation interior

• Certain 2019 and 2020 Work Truck, Custom and Custom Trail Boss configurations can have different dashboard styling

• Compatible 2022–2024 Limited or LTD models retained the interior covered by this category

• Refreshed 2022.5 and newer interiors use different A-Tach mounting solutions

Compare the factory display, surrounding trim, dashboard seams and center console with the individual product photos. If the pictured interior does not match, do not assume the mount will fit because the year and truck name are listed.

Choose Your Mounting Location

This category offers several mounting positions and device capabilities:

• Above the factory center display

• Along the left edge of the compatible display

• Along the right edge of the compatible display

• On the left or right side of a compatible center console

• A larger commercial platform for tablets and work devices

Consider who will use the device, the size of the holder and whether the completed installation could interfere with shifting or vehicle controls.

A-Tach #50032: Above-Display Dash Mount

A-Tach #50032 attaches along the area above the factory center display, providing an extended mounting platform for a separately purchased phone or device holder.

This location offers flexibility when positioning a phone, magnetic holder, wireless charger, GPS unit or another compatible device.

The listed vehicle applications include:

• Silverado and Sierra 1500: 2019–2022

• Silverado and Sierra 2500HD/3500HD: 2020–2022

• Silverado and Sierra 1500–3500 Limited/LTD: 2022–2024

The mount does not fit certain 2019–2020 Limited, LTD, Work Truck, Custom or Custom Trail Boss interiors. Compare your dashboard with the product photos and complete fitment notice.

A-Tach #50159: Commercial Phone and Tablet Mount

A-Tach #50159 is a commercial mounting platform designed for compatible Silverado and Sierra trucks. It attaches above the factory display and provides additional capability for tablets, GPS units and larger work-related devices.

It can be useful in:

• Construction and service vehicles

• Delivery and route operations

• Fleet trucks

• Agriculture and towing applications

• Dispatch and field communication

• Digital work orders

• GPS and navigation equipment

• Compatible tablet-based business systems

For customers who do not need the commercial configuration, #50032 provides a standard above-display mounting option.

Compatibility varies by year, model and interior. Review the complete #50159 product fitment before ordering, particularly for Limited, LTD, Work Truck, Custom and Custom Trail Boss configurations.

Left- and Right-Side Display Mounts

A-Tach offers separate mounts for the left and right edges of the compatible larger factory display.

A-Tach #50097: Left Display-Side Mount

A-Tach #50097 attaches along the left edge of the factory display, positioning the device closer to the driver.

This location can be useful for navigation and applications requiring convenient driver access.

A-Tach #50097 fits only the larger display style shown in the product photos. It does not fit trucks with the smaller display.

A larger phone, case or holder could interfere with shifting in some configurations. Consider the complete size of the device and holder before ordering.

A-Tach #50098: Right Display-Side Mount

A-Tach #50098 attaches along the right edge of the compatible factory display.

The right-side position can provide additional separation from the steering wheel and may make the device more accessible to a passenger.

A-Tach #50098 fits only the larger display style shown in the product photos. It does not fit trucks with the smaller display.

Both display-side mounts include 2022–2023 Limited/LTD applications in their individual fitment. Check the specific product page rather than assuming every 2024 Limited/LTD truck is covered by every mount.

Left- and Right-Side Console Mounts

Console mounting provides an alternative for drivers who prefer the phone or compatible device lower in the cab and away from the factory display.

A-Tach #50782: Right Console Mount

A-Tach #50782 attaches on the right side of the compatible center console. It provides a dedicated platform for a phone, magnetic holder, wireless charger or other compatible device holder.

A-Tach #50783: Left Console Mount

A-Tach #50783 attaches on the left side of the compatible center console, positioning the device closer to the driver.

These mounts do not fit trucks with shifting controls located in the floor console.

Console designs vary considerably. Compare the shifter, cup holders, seams and surrounding trim with the individual product photos before ordering.

Which Mount Should You Choose?

Choose #50032 if you want a flexible standard mounting platform above the compatible center display.

Choose #50159 if you need a larger commercial platform for a tablet, GPS unit or work-related device.

Choose #50097 if your truck has the pictured larger display and you prefer a driver-side position.

Choose #50098 if your truck has the pictured larger display and you prefer a passenger-side position.

Choose #50782 or #50783 if your compatible truck does not have shifting controls in the floor console and you prefer a console-mounted location.

Always confirm the individual product’s exact fitment range. Not every mount shown covers every vehicle listed at the category level.

A Two-Part Vehicle-Specific System

An A-Tach mounting solution consists of two separately purchased components:

1. Vehicle-specific dash or console mount: Selected according to the truck’s model, year, trim, display, shifter, console and preferred mounting location.

2. Phone or device holder: Selected according to the device dimensions, protective case and preferred holding or charging features.

Your truck’s interior determines the vehicle mount. Your device, case and preferred features determine the holder.

Depending on the holder selected, an A-Tach mount can be configured for:

• Adjustable clamp-style phone holders

• Large phones and protective cases

• Magnetic phone holders

• MagSafe-compatible holders

• Qi wireless charging holders

• Qi2 magnetic wireless charging holders

• GPS and navigation devices

• Tablets on compatible mounting platforms

• Other compatible commercial and fleet equipment

Because the vehicle mount and holder are separate components, the holder can be changed later if your phone, case or equipment changes.

Find your phone or device holder

Why the Actual Dashboard Matters

Several model years, truck series and interior generations overlap in this category. Before choosing a mount, check:

• Silverado or Sierra model

• 1500, 2500HD or 3500HD series

• Exact model year

• Standard or Limited/LTD designation

• Factory display size and styling

• Surrounding dashboard trim

• Work Truck, Custom or Custom Trail Boss configuration

• Dashboard or floor-console shifter location

• Center-console and cup-holder layout

• Intended device and mounting position

The dashboard shown in the product photos must match your truck. Vehicle-specific fitment depends on the actual attachment area, not simply the badge on the exterior.

Designed for Personal, Work and Fleet Trucks

Silverado and Sierra trucks in these model ranges are used for commuting, towing, construction, agriculture, delivery, service work and fleet operations.

Depending on the mount and holder selected, an A-Tach mounting system can provide a consistent location for:

• GPS navigation and route planning

• Hands-free phone communication

• Towing and travel information

• Dispatch and field communication

• Digital work orders

• Fleet-management applications

• Compatible tablets

• Other work-related mobile devices

Always position and operate mounted equipment so it does not obstruct the driver’s view, cover essential controls or interfere with safe vehicle operation.

Vehicle-Specific, No-Drill Installation

A-Tach Silverado and Sierra mounts are designed to install without drilling holes into the vehicle dashboard or console. The attachment method varies according to the selected product.

A vehicle-specific A-Tach mount avoids relying on:

• A windshield suction cup

• Permanent dashboard adhesive

• An ordinary vent-louver clip

• A cup-holder mounting base

• A permanently drilled vehicle bracket

Read the supplied instructions and test-fit the vehicle-specific mount before attaching the separately purchased phone or device holder.

Why Choose an A-Tach Silverado or Sierra Mount?

• Vehicle-specific Silverado and Sierra designs

• Accurate coverage for standard and Limited/LTD applications

• Above-display, display-side and console mounting choices

• Commercial phone and tablet platform available

• No drilling into the vehicle dashboard or console

• No windshield suction cup required

• Interchangeable phone and device holders

• Magnetic, MagSafe, Qi and Qi2 holder options

• Useful for personal, commercial and fleet trucks

• Durable ABS plastic construction

• Manufactured in the USA

• Made by a veteran-owned American company

Frequently Asked Questions

Does this category fit every Silverado and Sierra from 2019 through 2024?

No. Regular Silverado and Sierra coverage ends with the compatible 2022 interiors. The 2023 and 2024 applications are limited to certain Limited or LTD continuation models using the compatible dashboard.

What are the exact model-year ranges?

This category covers Silverado and Sierra 1500 trucks from 2019–2022, Silverado and Sierra 2500HD/3500HD trucks from 2020–2022 and compatible Silverado/Sierra 1500–3500 Limited or LTD models from 2022–2024.

Does this page cover a regular 2023 Silverado or Sierra?

Not necessarily. A regular 2023 truck with the newer interior requires a mount designed for that dashboard. This category covers compatible 2023 Limited or LTD continuation models.

Does this page cover a 2024 Silverado or Sierra?

Only compatible 2024 Limited or LTD continuation models are covered at the category level. Check the individual product because not every mount has the same end year.

What about a 2019 or 2020 Limited or LD truck?

Certain 2019–2020 Limited or LD trucks use the previous-generation interior and require mounts from the earlier Silverado/Sierra category. Compare the dashboard with the product photos before ordering.

Which mounts fit the larger factory display?

A-Tach #50097 and #50098 are designed for the larger display shown in their product photos. They do not fit trucks with the smaller display.

Is a commercial tablet mount available?

Yes. A-Tach #50159 provides a commercial mounting platform for compatible tablets, GPS units and work-related devices.

Are console mounts available?

Yes. #50782 mounts on the right side and #50783 mounts on the left side of a compatible center console. They are not for trucks with shifting controls in the floor console.

Is the phone or device holder included?

No. The vehicle-specific mount and phone or device holder are purchased separately. This lets you select a holder according to your device dimensions, protective case and desired features.

Can I use a MagSafe or wireless charging holder?

Yes. After selecting the correct vehicle mount, add a compatible magnetic, MagSafe, Qi wireless charging or Qi2 magnetic charging holder.

Do these mounts require dashboard drilling?

No. A-Tach vehicle-specific mounts are designed for no-drill installation. Follow the supplied instructions and test-fit the mount before attaching the holder.

Find the Correct Mount for Your Silverado or Sierra

First confirm your truck’s model, series, year and Limited/LTD designation. Next, compare the display, surrounding dashboard, shifter, cup holders and center console with the individual product photos.

Choose the vehicle-specific mount that provides your preferred above-display, left-side, right-side, console or commercial mounting location. Then add the separately purchased phone or device holder that fits your equipment and protective case.

If you cannot confidently identify your truck’s interior, contact A-Tach Mounts before ordering and include clear photos of the center display, surrounding dashboard, shifter and console.