2021–Current Ford F-150 Phone Mount – Dash Mount #50271
Give your 2021, 2022, 2023, 2024, 2025, 2026 or newer Ford F-150 a clean, vehicle-specific location for your phone.
A-Tach Mount #50271 is designed for compatible 2021–current Ford F-150 and F-150 Raptor models with the dashboard and center-display configuration shown in the product photos.
The mount attaches along the area below the center display, extending across the available mounting area toward the passenger side. It provides a dedicated mounting platform for a compatible phone or tablet holder.
Important: This product is the vehicle-specific dash mount only. A phone or device holder is purchased separately.
Important Ford F-150 Fitment Information
A-Tach #50271 is designed for:
Your Dashboard Must Match the Photos
Ford offers different dashboard and center-display configurations.
Do not order this mount based on model year alone.
Before purchasing, compare your truck with the product photos, paying particular attention to:
The center display
The trim directly below the display
The shape of the dashboard
The mounting area below the display
The surrounding controls and trim
If your dashboard does not match the photos, contact A-Tach before ordering.
Important Lightning Notice
This product should not be ordered for a Ford F-150 Lightning unless A-Tach specifically confirms compatibility for your particular Lightning dashboard.
The current product listing contains conflicting Lightning fitment information, so the safest customer-facing approach is to verify Lightning compatibility before purchase.
A Vehicle-Specific Ford F-150 Dash Mount
A-Tach #50271 is designed specifically for the compatible Ford F-150 dashboard rather than being a universal suction-cup, vent or adhesive mount.
The mount attaches to the factory trim area below the center display, creating a convenient location for mounting a phone or other compatible device.
Because the mounting platform extends across the area below the display, you can position your device where it works best for your driving setup.
Mounts Below the Center Display
The #50271 mount is designed to fit along the entire compatible area below the F-150 center display.
The mounting platform extends toward the passenger side, providing flexibility for positioning a phone or other device.
This can be especially useful if you want to mount:
The actual position of your device will depend on the holder you select.
No Drilling Required
A-Tach #50271 is designed to install without drilling holes into the F-150 dashboard.
The mount uses the existing features of the truck's interior rather than requiring you to permanently modify the dashboard.
Installation is designed to be straightforward and does not require special tools.
Always follow the supplied installation instructions.
A Two-Part Mounting System
The A-Tach system consists of two separate components.
1. Vehicle-Specific Dash Mount
A-Tach #50271 is the component designed specifically for the Ford F-150 dashboard.
It provides the mounting platform.
2. Phone or Device Holder
A compatible phone or device holder attaches to the vehicle mount and holds your actual device.
The holder is not included with #50271.
This two-part design allows you to choose the holder that works best with your particular phone, case or tablet.
Choose the Right Phone Holder
A-Tach offers multiple device-holder options that can be paired with compatible vehicle mounts.
Depending on your device and needs, options include:
Adjustable phone holders
Magnetic phone holders
MagSafe-compatible holders
Wireless charging phone holders
Magnetic wireless charging holders
Qi2 wireless charging holders
Tablet and larger-device holders
Check the specifications of the holder before ordering to make sure it is compatible with your phone and case.
MagSafe and Magnetic Phone Options
If you use a compatible MagSafe iPhone or magnetic phone case, you can pair the #50271 vehicle mount with a compatible magnetic or MagSafe holder.
The magnetic function comes from the device holder, not the vehicle-specific dash mount.
This gives you the flexibility to change holders later without replacing the vehicle mount.
Wireless Charging Options
Want to charge your phone while it is mounted?
Choose a compatible wireless charging phone holder.
A-Tach offers wireless charging options, including magnetic wireless charging and Qi2-compatible holders.
The charging electronics are contained in the selected device holder. The #50271 vehicle mount provides the physical mounting platform.
Can the F-150 Mount Hold a Tablet?
Yes, with a compatible tablet/device holder.
The #50271 mounting platform extends across the area below the center display, allowing it to be used with certain larger-device holders.
A tablet can be useful for:
Navigation
Work applications
Fleet or business use
Passenger entertainment
Larger-screen viewing
Always check the tablet holder's size and weight specifications before purchasing.
Why Choose a Vehicle-Specific F-150 Phone Mount?
Universal phone mounts are designed to work in many different vehicles.
A-Tach takes a different approach.
The #50271 mount is designed around the specific dashboard configuration of the compatible Ford F-150.
That allows the mounting location to follow the shape and features of the truck's factory interior instead of relying on a generic suction cup, vent clip or adhesive pad.
Benefits include:
Designed for compatible 2021–current Ford F-150 dashboards
Compatible with specified F-150 Raptor configurations
Mounts below the center display
Extends toward the passenger side
No dashboard drilling
No windshield suction cup
No air-vent clip
No special installation tools required
Four pre-drilled AMPS mounting holes
Compatible with many AMPS-pattern holders
Phone and tablet mounting options
Made in the USA
AMPS Mounting Pattern
A-Tach #50271 includes four pre-drilled holes in an AMPS mounting pattern.
The AMPS pattern provides flexibility when selecting a compatible device holder.
You can use compatible A-Tach holders or another device holder designed for the same mounting pattern.
Always verify the holder's mounting pattern before purchasing.
Designed for Work and Everyday Driving
The Ford F-150 is used for commuting, construction, contracting, towing, travel, recreation and everyday transportation.
A dedicated phone mount can provide a convenient place for your phone while keeping it out of the cup holder and away from the vehicle's air vents.
A mounted phone can be useful for navigation, hands-free functions, music and other permitted uses.
Always position and use your phone in a way that does not interfere with your visibility, vehicle controls or safe operation of the vehicle.
Installation
A-Tach #50271 is designed for straightforward installation using the existing features of the F-150 interior.
Before installation:
Confirm that your dashboard matches the product photographs.
Read the installation instructions completely.
Test-fit the mount in the intended location.
Confirm that your selected device holder is compatible with the AMPS mounting pattern.
Check the final position of your phone or device.
Make sure the mounted device does not interfere with controls or visibility.
The vehicle mount is intended to remain installed rather than being repeatedly removed and reinstalled.
What Is Included?
Included:
Not included:
Phone holder
MagSafe holder
Wireless charging holder
Tablet holder
A compatible device holder must be purchased separately.
Customer Review
The product currently has a 5.0/5 rating from one customer review.
The reviewer specifically praised how the mount clips onto the gray trim below the F-150's screen, its relatively low-profile appearance, and the ability to install two mounts for the driver and passenger. The customer also reported using existing iOttie clips with the A-Tach mount.
That feedback is particularly useful because it describes the actual mounting location and demonstrates that the AMPS-style mounting platform can provide flexibility when selecting a compatible holder.
Made in the USA
A-Tach Mounts designs and manufactures its vehicle-specific mounting solutions in the USA.
Our approach is to design mounting products around individual vehicle interiors rather than relying exclusively on universal mounts.
A-Tach is also a veteran-owned business.
Frequently Asked Questions
What Ford F-150 years does A-Tach #50271 fit?
A-Tach #50271 is designed for compatible 2021–current Ford F-150 models, including specified F-150 Raptor applications, with the dashboard configuration shown in the product photos.
Does #50271 fit every 2021–current F-150?
No. The dashboard and display must match the configuration shown in the product photos.
Does #50271 fit the Ford F-150 Lightning?
Verify this with A-Tach before ordering. The current product listing contains conflicting Lightning information. Do not assume that a standard F-150 mount will fit the Lightning.
Where does this F-150 mount attach?
It attaches along the compatible trim area below the center display and extends toward the passenger side.
Is the phone holder included?
No. #50271 is the vehicle-specific dash mount only. A compatible phone or device holder must be purchased separately.
Can I use a MagSafe phone?
Yes, when paired with a compatible MagSafe or magnetic holder.
Can I use wireless charging?
Yes. Pair the vehicle mount with a compatible wireless charging holder.
Can I mount a tablet?
Yes, when paired with a compatible tablet/device holder.
Does the mount require drilling?
No drilling into the dashboard is required.
Does it use a suction cup?
No. The vehicle-specific mount attaches to the designated area of the F-150 interior.
Does it attach to an air vent?
No. The mount attaches below the center display rather than using an air-vent clip.
Can I use another brand's phone holder?
The mount uses a four-hole AMPS mounting pattern. A compatible third-party holder may work if it uses the appropriate AMPS pattern. Verify compatibility before purchasing.
Can I mount two phones?
The mounting platform provides flexibility for positioning devices, and the customer review on this product specifically describes using two mounts for the driver and passenger. Each phone requires its own compatible holder and mounting solution.
Ford F-150 Phone Mount #50271
If you have a compatible 2021–current Ford F-150 and want a vehicle-specific mounting platform below the center display, A-Tach #50271 provides a clean alternative to generic windshield and vent mounts.
Compare your F-150 dashboard with the product photos, confirm the fitment, and then choose the phone, MagSafe, wireless charging or tablet holder that best fits your device.
Vehicle-specific design. No drilling. AMPS-compatible. Made in the USA.
[ITEMPRICE]
GTM-KSP4LST